Dbx TR1616 Manuel d'utilisateur télécharger pdf (Page 10)

TR1616 Owner’s Manual

panel deScriptionS

Front Panel

1. 4-Segment Input Meter

These meters display the input signal level for each channel.

2. GAIN Knob

These knobs adjust the input gain for each channel. The range of these controls is 0 dB

to +60 dB (XLR input) and -15 dB to +45 dB (1/4” input).

3. +48 Button

+48 Volts of phantom power is available for condenser microphones and direct boxes

which require it. These buttons enable and disable the phantom power for each channel.

The button’s LED will light when the function is engaged.

4. 20dB PAD Button

These buttons enable the 20dB pad for each channel, which can be used to prevent the

preamp input from being overdriven. The button’s LED will light when the function is

engaged.

5. LOW CUT Button

These buttons enable and disable the low cut ﬁlter for each channel. This ﬁlter is a low

cut ﬁlter with a cutoff frequency of 80 Hz. The button’s LED will light when the function

is engaged.

6. POLARITY Button

These buttons enable and disable the 1800 polarity inversion for each channel. The

button’s LED will light when the function is engaged.

7. TRANSMIT BANK Display

This dual 7-segment display shows which bank on the BLU link network the TR1616

is transmitting its audio on. Each bank consists of 16 channels. Each TR1616 on the

network must have a unique TRANSMIT BANK selected. The desired TRANSMIT BANK

can be selected by adjusting the slotted control below the display. See “Making

Connections–Cabling” > “BLU link” for further information on this display.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Pas de commentaire

Dbx TR1616 Manuel d'utilisateur Page 10