Dbx DriveRack PA2 Manuel du propriétaire télécharger pdf (Page 57)

2-Way Application

This application is suited for systems using full range main speakers along with subs or for systems using bi-ampable main

speakers with no subs. In this type of application, the PA2 will split the signal into two frequency bands and send all lower

frequencies out the LOW outputs to the subs (or low frequency drivers if configuring a bi-amplified main speaker system) and

all upper frequencies out the HIGH outputs to the full range mains (or high frequency drivers if configuring a bi-amplified main

speaker system). When configuring the PA2 for this type of application, the LOW and HIGH outputs will be enabled and the

MID outputs will be disabled.

Application Notes:

• Make sure your mixer and amplifiers (or powered speakers) are turned off before making connections.

• Make connections as described in ‘Making Connections’ on page 8 then apply power to the system according to

the instructions described in ‘Applying Power’ on page 10.

• Run the Setup Wizard and select the MONO input option if connecting your mixer to the PA2 via a single connection, or

select the STEREO input option if connecting the mixer to the PA2 via a left/right stereo connection.

• In the Setup Wizard, select your main and sub speakers from the list. If you’re using passive (non bi-amped) mains along

with subs, select the PASSIVE main speaker configuration option when prompted. If you’re using a bi-ampable main

speaker without subs, select the 2-WAY main speaker configuration option when prompted. If your speakers are not listed

in the PA2, use the DriveRack PA2 control app to check the online database to see if your speaker tunings have been

added. If you can’t find speaker tunings for your speakers, select the NOT LISTED option from the tuning list.

120V 50/60Hz

Left Main Speaker Right Main Speaker

Left Sub Speaker Right Sub Speaker

High/Mid Amp

Low Amp

or or

Windows

or Mac

Computer

iOS

or Android

Tablet

iOS

or Android

Phone

Mixer

R L/Mono

To Power

Outlet

Wireless Router

LEGEND

Analog Audio Connections

Omit Connection For Mono Systems

Ethernet Connection

IEC Power Cord

Left Channel

Right Channel

Wi-Fi Signal

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 69 70

Commentaires sur ces manuels

Pas de commentaire

Dbx DriveRack PA2 Manuel du propriétaire Page 57

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement musical Dbx DriveRack PA2